Need help?Do you have a question about the KERUI G19 and is the answer not in the manual?
General| Brand | KERUI |
|---|---|
| Model | G19 |
| Category | Security System |
| Language | English |
Steps for the initial setup and power-on of the alarm host.
How to activate the alarm system for full on-site detection.
Procedure to deactivate the alarm system and return it to a non-alert state.
How to arm the system while remaining inside, disabling interior detectors.
How to trigger an immediate alarm in emergency situations.
How to set, manage, and delete phone numbers for alarm notifications.
Detailed steps for configuring up to 8 notification numbers.
Guide to managing connected accessories like remotes and detectors.
Procedures for studying, deleting, and configuring remote controls.
Step-by-step guide to learning remote controls into the host.
Introduction to managing various detectors connected to the host.
Guide on how to learn detectors (sensors) into the host system.
How to study and delete access cards for disarming the system.
Step-by-step guide to learning access cards into the host.
How to code match and configure the wireless strobe siren.
Steps to match the wireless strobe siren with the host.
Configuration options for system parameters and behavior.
Configuring user passwords, administrator passwords, and keypad lock.
Setting a 4-digit password for user access and operation.
Setting a 6-digit password for administrative control and settings.
Procedures to restore factory default settings for various components.
Actions taken by the host upon receiving an alarm, including dialing and recording playback.
How to control the host remotely using any telephone after entering the password.
To Next Page
