KERUI KR-K7 - User Manual

KR-K7 User manual
23
System setup
11.1 Delay setting
Picture 11-1
Arm Delay
Gives the ability to use the arm key on the panel when leaving the guard area to delay the arming for
x seconds. You can set a delay of 0-255 seconds. In the delay arming status, the host beeps every
second till the delay is over and goes into arm status. The value zero means no delay on arming.
Alarm Delay
Gives the ability when entering the guard area to delay the alarm for x seconds. You can set a delay of
0-255 seconds. In the alarm delay status, the host beeps every second till the delay is over. The value
zero means no delay on alarm.

Summary

System Setup

Delay Setting

Configures system delay for arming and alarming.

Auto Arm;Disarm Configuration

Delete Auto Arm;Disarm Settings

Removes programmed automatic arming and disarming settings for zones.

Volume and Siren Adjustment

Siren and Ring Time Settings

Sets the duration of siren alerts and call ringing times.

SMS Notifications and Key Tone

Key Tone Configuration

Controls the audible feedback for button presses on the panel.

Screensaver and Language Settings

Language Selection

Allows selection between Chinese and English display languages.

Security Settings

Manages user passwords, administrator passwords, and keypad lock.

SMS Reply Function

Power Alarm Settings

Panel Power and Battery Alerts

Configures alerts for panel power off, on, and low battery status.

Arming Modes

Ready to Arm Function

Checks if all sensors are closed before allowing arming.

Keypad Arm;Disarm Control

Enables arming and disarming using the keypad directly.

Contact ID Configuration

Factory Reset

Phone Call and Recording

Making Phone Calls

Allows making phone calls directly from the panel.

Recording Voice Messages

Enables recording a custom voice message for alarm events.

Alarm and Arm;Disarm Logs

Arm;Disarm Log Details

Logs all arming and disarming events with timestamps and methods.

About System Information

SMS Commands for System Configuration

GPRS Management and Networking

Login to Management Center

Accessing the management software for the alarm system.

Adding New Users

Process for adding new users to the management system.

Alarm System Network Setup

Configures network connection details for data services.

KR-K7 Mobile Application

Phone Registration

Registering the app using a phone number and GSM connection.

Email Registration

Equipment Binding

Device Password Access

App Control Panel - WIFI Mode

Device Property Management

Managing device name, password, voice activation, and binding status.

App System Settings

Navigating app settings like device manager and account management.

App Control Panel - GSM Mode

Alarm Response Procedures

Remote Phone Control

System Parameters Overview

Factory Default Zone Types

Default zone configurations for various sensor types.

Factory Default Values

Default settings for passwords, timing, and SMS messages.

Technical Specifications

Technical specifications including voltage, frequency, and battery.

Sensor Installation and Usage

Door Sensor Installation and Use

Instructions for installing and using magnetic door and window sensors.

Sensor Battery Replacement

Guide to replacing sensor batteries when low battery warnings occur.

PIR Motion Sensor Installation

Compatible Sensors and Accessories

Troubleshooting Common Issues

Sensor Zone List and Configuration

KERUI KR-K7 Specifications

General

Brand	KERUI
Model	KR-K7
Category	Security System
Language	English