KR-K7 User manual
30
11.12 Ready to Arm
This function checks if all door sensors are closed when arming. A door icon will be shown in the top
menu of the host (red color when open, white when closed). When function switched ‘ON’ and a door
is open, the system cannot arm and a voice alert sounds “XX zone on”. You can’t arm the system untill
all door sensors are closed. If you set this function ‘OFF’, no matter a door is open or close, the
system can be armed.
Picture 11-13
11.13 Keypad arm/disarm
Enables the use of the keypad to arm or disarm. When off these functions can only be performed
using a remote controller or the app.
Picture 11-14
To Next Page
Loading...
