9
8
Most system-wide and weather setup options are accessed
from the main Options menu by pressing the
button
from any Weather Measurement Screen or the main
Targeting Screen.
• MODE
• BLUETOOTH
» Bluetooth On/O
» Conct
• DATA PORT
• MEMORY OPTIONS
» Clear Log
» Auto Store
» Store Rate
» Overwrite
• GRAPH SCALE
• DISPLAY
» Auto Shutdown
» Contrast
» Backlight
• SYSTEM
» Time & Date
» Compass Cal
» Measurements
» Units
» Lang
» Batt
» Factory Restore
• ABOUT
» Version
» Legal
KESTREL OPTIONS MENU
Your Kestrel Ballistics Weather Meter is both a
complete weather meter AND an advanced
ballistics calculator. You must select either Weather
Mode or Ballistics Mode depending on the functions
you desire:
» Weather Measurements, History and Data Logs are
accessed in Weather Mode.
» The Targeting Screen and all ballistics settings
(Target, Wind, Gun, Environment, Range Card,
Ballistics, Manage Guns) are accessed in Ballistics
Mode.
HOW TO SELECT THE OPERATING MODE:
» Select Mode under the Options Menu.
» Set Mode to Weather or Ballistics.
NOTE! You can also “jump” between modes by pressing the
BACKLIGHT button twice quickly. You will enter Weather Mode at
the last Measurement Screen used, making it convenient to take
advanced wind averaging measurements, for example.
KESTREL OPERATING MODES KESTREL MENU NAVIGATION
TYPES OF MENU ITEMS
TARGETING SCREEN
Note! The Windage Adjustment provides two values
creating a wind prole bracket based on a 5 second
rolling average shown.
Windage solution based on the average wind speed.
Shown on Range Card as Wnd1.
Windage solution based on the maximum wind speed.
Shown on Range Card as Wnd 2.
* Range Card available on Elite Model only.
SCOPE ELEVATION ADJUSTMENT
(U=Up/D=Down)
SCOPE WINDAGE ADJUSTMENT
(L = Left, R = Right)
Targeting Screen
Active Target (Elite Model only)
Bluetooth ® Connection Status
» Tasks are executed by highlighting the eld and pressing Select.
» The presence of a submenu is indicated by a “…” following a eld.
» Highlight the eld and press Select to enter a submenu.
» Adjust the value of a Combo Field by pressing left or right.
» Enter the Combo Field sub menu by pressing select.
» Adjust a setting by pressing left or right.
» An arrow indicates there are additional elds o screen.
» Locked values are either driven by another value or cannot be edited on
the current screen.
» Locked values may have submenus which are entered by pressing select.
» Navigation buttons indicate available actions on the current screen.
Shop for Quality products online at:
1.888.610.7664
www.
To Next Page
Loading...
Need help?
General
