KETRON sd4 - GM Parameter Editing and MIDI Menu Overview; Editing GM Track Parameters; MIDI Menu for Channel Management

35
 
 Pressthekey.TheLEDblinksandthedisplayshowstheMidichannelthatwillbe
changed.
 SelecttheMIDIchanneltobemodifiedusingthekeys.Attention!Thenumberof
channelsthatcanbeselectedfromtheGMmenuchangesbasedontheoperatingmode
oftheinstrument.

Inparticular,inthefollowingmodes:
o 16channelscanbeselected,beingthoserelated
totheMIDIIN1port.
o :thereare32,thefirst16relatetotheMIDIIN1portandtheother16tothe
MIDIIN2port.
o :nochannelisavailableandthedisplayshowsthreedashes“---”.
 Tochangethe,pressthekey.ThecorrespondingLEDstartsblinking
andthedisplayshowsthevalueofthecurrentvolumeoftheMIDItrackselected.Editthe
valueusingthekeys.
 Tochangethe,pressthekey.ThecorrespondingLED
startsblinkingandthedisplayshowstheprogressivenumberofthesoundcurrentlyset
onthetrackselected.Editthevalueusingthekeys.
 Tosetthetrackselectedinmode,pressthekey.ThecorrespondingLED
startsblinkingandthedisplayshowsthestatus(ON/OFF)oftheMIDItrackselected.Edit
thevalueusingthekeys.Oncethetrackissetin‘solo’mode,itwillbemarked
intheGMmenuwithadotnexttothenumberoftherelatedchannel.Inthisway,itisquite
cleartoidentifytheMiditracksonwhichthe‘solo’parameterisenabled.
 Toselectanewtracktobeedited,exittheparametereditingmodebypressingthe
,currentlyselected(theLEDblinks)andselectanew
trackusingthekeys.
 ToexittheGMmenu,presstherelativekey.

Inthismenuyoucanmanageallthereceptionandtransmissionchannelsoftheinstrument.

Inmode,therepresentstheMIDIchannelonwhichyou
cansendthenotestoallthreevoicesoftheinstrument,basedonthe
splitpoint.Toeditthereceptionchannel:
 Pressthekey,theLEDstartsblinkingandthedisplayshowsthevalueofthemidi
receptionchannel“”.
 Editthereceptionchannelusingthekeys.
Otherparameterscanbeeditedusingthenumericalkeypad.Likewiseforthe,
itdoesindeedactivatevariousfunctionsbasedonthenumberofthekeypressed.Inthis
caseagain,ifyouholdoneofthenumbersdown,thedisplaywillfirstshowa3-letterinitial
thatindicatestheparameterbeingeditedandthentherelativevalue.Forexample,toedit
thereceptionchanneloftheRightvoice,simplyholddownkey1andthedisplaywillfirst