1. Place Brewer box on a large steady surface
(such as a table or countertop) or on the
floor. Open the box.
2. Remove the Quick Start Guide, Use & Care
Guide and other literature.
3. Reach into the box and grasp the polyfoam
that encases the Brewer.
4. Carefully pull the polyfoam toward you and
out of the box. The Brewer will still be
encased in the poly foam.
5. Remove the poly foam packaging material.
6. Place the brewer upright on a flat, steady
surface.
7. Remove the K-Cup storage bin from the
brewer and record on page 3 of this book
the Serial Number located on the UL label
behind it. The Serial Number is also
located on the Brewer box.
8. We recommend you save all packing
materials in case future shipping of the
product is necessary.
SET-UP & OPERATION
Unpacking Instructions
SECTION 1
WARNING:
Keep all plastic bags away
from children.
To Next Page
Loading...
Need help?
General
