EasyManuals Logo

Keurig B3000 Use & Care Guide

Keurig B3000
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
If no K-Cup is detected the display will show:
Either insert a K-Cup or press YES to continue.
Choosing option “c” the display will read:
If no mug is present or not detected on the
drip tray it will display:
Take the appropriate action.
Four brew size options are available, they are
from left to right 4 oz, 6 oz, 8 oz and 10 oz and
are indicated in the cup and mug icons. 8 oz is
the standard brew size, 4 oz and 6 oz are more
robust and 10 oz gives a milder brew.
5. Press your brew size selection.
The brewer display will indicate:
6. There may be a short pause before the
brewing process begins. The entire brew
process lasts for approximately 40 to 52
seconds (depending upon brew size select-
ed) and ends with a burst of air to remove
all liquid coffee or tea from the KCup
®
.
The button below your selected brew size
will remain lit until the brew is completed
and the following is displayed:
7. Enjoy your first cup of Keurig Brewed
®
gourmet coffee or tea!
8. The Brewer will be ready again for use in
approximately 20 seconds.
The brewer will then revert to its idle state
and indicate:
Helpful Hints
1. Keep your Brewer turned ‘ON’ at all
times.
To brew a fresh cup of coffee or tea
anytime you want, we suggest you keep
your Brewer turned ‘ON’ all the time.
2. Keurig requires the use of filtered water
on thi
s
s brewer.
We recommend the
OmniPure Filter Kit, Keurig PN 5025.
3. Plug Brewer into its own grounded outlet.
If the electric circuit is overloaded with
other appliances, your Brewer may not
function properly. If possible, The Brewer
should be operated on its own circuit,
separate from other appliances. A separate
circuit with a GFCI is recommended.
4. Brewing into a travel mug.
To brew into a
travel mug, simply lift and rotate back the
drip plate housing till it rests against the
drip plate back wall then place travel mug
on lower drip plate and commence brew.
CAUTION: There is extremely hot water in
the K-Cup Holder during the brew process.
T
o avoid risk of injury, do not lift the
Handle or open the K-Cup
®
Chamber
during the brew process.
PLACE YOUR CUP
OR SELECT CONT.
KEURIG BREWED
ENJOY!
Insert K-Cup
NOTE:
Do not remove the foil lid or
puncture the K-Cup
®
portion pack.
NO K-CUP DETECTED
CONTINUE ANYWAY?
READY
SELECT BREW SIZE
BREWING
NOTE:
Following the brew, your Brewer will fill
in preparation for the next brew. The pump will
make a vibrating sound. This is normal.
NO YES
READY – CHOOSE K-CUP
LIFT HANDLE
Español
Français
HOT
WATER

Other manuals for Keurig B3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keurig B3000 and is the answer not in the manual?

Keurig B3000 Specifications

General IconGeneral
Voltage120 V
Brew TimeUnder 1 minute
Compatible PodsK-Cup pods
Brew Sizes6, 8, 10, 12 oz
DisplayLCD
ColorBlack

Related product manuals