Caring For Your Brewer
For great-tasting coffee, keep your brewer running at peak performance by following the recommended
maintenance schedule.
Frequency Product Benefit
Weekly Keurig® Rinse Pods
Weekly cleaning with Keurig® Rinse Pods helps reduce
flavor carryover between brews
Every 2 months Keurig® Water Filters
Keep your water fresh and help remove impurities
Every 3 months or when the
Descale notification turns on
Keurig® Descaling Solution
Eliminate mineral buildup to enhance the taste of your
coffee and preserve the long-term health and performance
of your coffee maker
Storage: Empty the Chill Tank prior to storage. If the brewer has been in storage or hasn’t been used in two days,
run a Rinse before brewing your beverage.
Chill Tank: There will be some evaporation of the Chill Tank water. You will need to add water to the Chill Tank
once per year and will be alerted by the CHILL TANK LED.
Water Reservoir
The water reservoir should be
cleaned periodically by wiping the
inside of the reservoir and underside
of the lid with a damp, nonabrasive,
lint-free cloth. Do not dry the
inside of the water reservoir with a
cloth, as lint may remain. Allow the
reservoir to dry completely.
Chill Tank Lid
The Chill Tank lid should be
cleaned periodically by wiping the
underside of the lid with a damp,
nonabrasive, lint-free cloth.
Brewer Exterior
Keep your Keurig® brewer looking
its best by cleaning the exterior
from time to time. Just clean the
plastic with a damp, soapy,
lint-free, nonabrasive cloth.
Never immerse the brewer in water
or other liquids.
Drip Tray
The drip tray can hold up to
7 ounces of liquid and should be
emptied and cleaned every three
brews. To remove, slide it toward
you, keeping it level to avoid spilling.
Rinse and clean with a damp,
soapy, lint-free, nonabrasive cloth.
To Next Page
Loading...
