To Next PageTo Next Page
Need help?Do you have a question about the Key Automation 900RXI-42R and is the answer not in the manual?
General| Brand | Key Automation |
|---|---|
| Model | 900RXI-42R |
| Category | Receiver |
| Language | English |
Fix code 1 or 2 channel click-fit/terminal board receivers with code self-learning.
Rolling code 1 or 2 channel click-fit/terminal board receivers with code self-learning.
230 Vac terminal board receiver with code self-learning and relay outputs.
Describes the initial test and LED indications when the receiver is powered on.
Explains the process for memorizing radio control codes via pushbuttons.
Details how to select and program receiver outputs (monostable, bistable, timed).
Process for deleting specific radio control codes or all stored codes.
Procedure to clear the entire memory of the integrated unit.
Sequence for memorizing new radio controls when one is already programmed.
Output changes status on each command; deactivated on power failure.
Output remains active for a fixed interval, extendable to 40 seconds.
Output activates ON or OFF based on specific transmitter channels.
Guidance on installing an aerial for optimal reception and capacity.
Instructions for environmentally responsible recycling or disposal.
