9
EN
2 - INTRODUCING THE PRODUCT
CODE DESCRIPTION
SUN5024 24 Vdc gearmotor with mechanical limit switches and lights, gate up to 500 kg, residential use.
SUN5324 24 Vdc gearmotor with mechanical limit switches, gate up to 500 kg, residential use.
SUN5024F 24 Vac gearmotor with magnetic limit switches and lights, gate up to 500 kg, intensive use, fast.
SUN7024 24 Vdc gearmotor with mechanical limit switches and lights, gate up to 700 kg, intensive use.
SUN7324 24 Vdc gearmotor with mechanical limit switches, gate up to 700 kg, intensive use.
SUN11024 24 Vdc gearmotor with mechanical limit switches and lights, gate up to 1100 kg, intensive use.
SUN11324M 24 Vdc gearmotor with magnetic limit switches, gate up to 1100 kg, intensive use.
The gear motor SUN is intended to be installed within systems for
the automation of sliding gates. The SUN gear motors have been
designed to automate sliding gates within the weight limits indicated
in the technical specications table.
The use of gear motors for applications which dier from those
indicated above is prohibited.
2.1 - Description of the product
2.2 - Model and technical characteristics
TECHNICAL DATA
MODELS SUN5024 SUN5324 SUN5024F SUN7024 SUN7324 SUN11024 SUN11324M
Speed
cm/s
26 26 40 25 25 20 20
Torque
Nm
12 12 23 26 26 38 38
Working cycle
cycles /
hour *
40 40 40 40 40 50 50
Control unit 14A CT10324 14AF 14A CT10324 14A CT10324
Power supply
automation
Vac
230
Frequency
Hz
50/60
Motor power supply
Vdc
24
Output power
W
250 250 300 345 345 360 360
Integrated lights YES NO YES YES NO YES NO
Degree of
protection
IP
44
Operating
temperature
°C
-20 +55
Leaves max weight
kg
500 500 500 700 700 1100 1100
Sound emission level
dB(A)
≤ 70
Dimensions (L-P-H)
mm
330 - 255 - 400
Package dimensions
mm
340 - 255 - 400
Package weight
kg
12,5 12,5 14 13,5 13,5 14,5 14,5
* The cycles per hour indicated are based on a standard door with a length of 2 m and a weight of 200 kg at an ambient temperature of 20 °C
To Next Page
Loading...
Need help?
General
