• VISCA Controllable: Responds to VISCA protocol for control by PTZ camera control
consoles. Supports addressing for multi-camera systems.
• Addressable: Up to 7 unique addresses for discreet control by RS-232 and/or VISCA systems
• Control System Support: Compass Control® Pro ready. Fully controllable by all IR, and RS-232
supported control systems via open API.
• KD-App Ready: When integrated with supported Key Digital Presentation Solutions Extenders and
Switchers including KD-UPS52U, KD-X100MRx, KD-PS42, and KD-X40MRx. Pre-built GUI populates
offering PTZ controls as source selection and display/projector controls via CEC Manager™.
Accessories:
• (1) 6ft USB A to USB B cable
• (1) Mounting Bolt
• (1) Power Supply, KD-PS12V2ASC, 12V 2A with screw-in connector
• (1) Remote, KD-RMCAM
• (1) 3-pin phoenix terminal
• (1) Wall mounting bracket
• (4) Wall mounting screws
• (1) Ceiling mounting upper bracket
• (1) Ceiling mounting lower cover
• (4) Ceiling mounting screws
To Next Page
Loading...
