Keychron K10 - Bluetooth Device Management; Switching and Reconnecting Bluetooth Devices; Power Saving Features; Turn Off Keyboard

12
Under Bluetooth mode, the keyboard backlight turns off when it is inactive for 10 minutes. Tap any
button to wake the keyboard. If want to disable this auto battery save mode, press fn+S+O for 4
seconds. Then if want to enter this power save mode again, press fn+S+O for 4 seconds.
“fn” + “1” / “fn” + “2” / “fn” + “3”
4
RECONNECT:
TURN OFF THE KEYBOARD
SWITCH BLUETOOTH DEVICES
Short press combination key "fn" + "1" / "fn" + "2" / "fn" + "3" to switch to other device.
RECONNECT:
1. Switch the keyboard to the Bluetooth option to activate the keyboard (the keyboard will connect to
the last connected device by default).
2. The Bluetooth indicator flashes for 4 seconds and automatically pairs with the last paired device.
3. If the Bluetooth indicator is off, press any button to enter the connection again.
* The keyboard must have been paired with the device to perform this function.
TURN OFF THE KEYBOARD
Switch to "Off"
BATTERY SAVER
Under Bluetooth mode, the keyboard backlight turns off when it is inactive for 10 minutes. Tap any
button to wake the keyboard. If want to disable this auto battery save mode, press fn+S+O for 4
seconds. Then if want to enter this power save mode again, press fn+S+O for 4 seconds.
12