Keychron K14 - Connectivity Modes and Device Switching; Switch Between Bluetooth and Wired Modes; Switching Paired Bluetooth Devices

BLUETOOTH/WIRED MODE (TOGGLE SWITCH)
WIRED MODE
I.Switch the toggle switch to Cable option (it only works when a USB cable is plugged in).
2.Connect our cable with your PC and keyboard,
3.Backlit will be turned on.
*Under Wired Mode, keyboard will not enter into Battery Saver Mode.
BLUETOOTH MODE
1. Switch the keyboard to Bluetooth option.
2. Backlit will be turned on.
3. Hold "Fn1+Q" key for 4 seconds to activate Bluetooth pairing (the Bluetooth indicator fast
flashes for 3 minutes to detect pairing.
4. Search for the Bluetooth device "Keychron 1<14" on your device and connect it (the Bluetooth
indicator goes off after successful pairing).
Note: This keyboard supports pairing up to 3 devices simultaneously via combination key
"fnl" + "Q" / "fnl " + "W" / "fnl " + "E".Simply short press combination keys "fnl" + "W" /
"fnl" + to switch. Follow the above procedures to connect with other devices.
*The Bluetooth indicator will continue to flash for 3 minutes.
**Slow or failed connections may exist due to different Bluetooth versions, please make sure all the
settings are correct.
SWITCH BLUETOOTH DEVICES
Short press combination key "fnl" + "Q" / "fnl" + "W" / "fnl" + "E" to switch to other device.
12