Reconnect:
1. Switch the keyboard to the Bluetooth option to activate the keyboard (the keyboard will connect to
the last connected device by default).
2. The Bluetooth indicator flashes for 3 seconds and automatically pairs with the last paired device.
3. If the Bluetooth indicator is off, press any button to enter the connection again.
* The keyboard must have been paired with the device to perform this function.
Turn off the Keyboard
Switch to "Off"
BATTERY SAVER
Under Bluetooth mode, the keyboard backlight turns off when it is inactive for 10 minutes. Tap any
button to wake the keyboard. If want to disable this auto battery save mode, press fn1+S+O for 4
seconds. Then if want to enter this power save mode again, press fn1+S+O for 4 seconds.
BACKLIT SETTING
to switch between different types of lighting effects.• Short press
When backlit is on, press • button to switch among them. Short press fnl and
or fnl and "right arrow" to adjust light colors. (For RGB version only)
"left arrow"
13
To Next Page
Loading...
