20
Additional Notes
The Bluetooth indicator will continue flashing for three minutes during pairing. Slow or failed
connections may occur due to variations in device settings or Bluetooth versions. Ensure all device
settings are correct for successful pairing.
Switch Bluetooth Devices
To switch between paired Bluetooth devices, use the key combinations fn + 1, fn + 2, or fn + 3. Each
combination corresponds to a previously paired device.
Reconnect
If the keyboard is already paired with a device and needs to reconnect:
• Switch the keyboard to Bluetooth mode to activate it.
• The Bluetooth indicator will flash for four seconds as it attempts to pair with the last
connected device.
• If the Bluetooth indicator is off, press any key to re-establish the connection.
Note: The keyboard must have been previously paired with the device for this function to
work.
Turn Off the Keyboard
To turn off the keyboard, switch it to Cable mode and unplug the power cable.
Backlight Settings
• To turn the backlight on or off, short press fn + tab or fn + knob (press).
• To switch between different backlight effects, short press fn + Q or fn + A.
To Next Page
Loading...
