To Next PageTo Next Page
Need help?Do you have a question about the Keyestudio 4WD and is the answer not in the manual?
Overview of the Micro:bit platform, its components, and capabilities.
Instructions for installing the necessary driver for Micro:bit connectivity.
Introduction to the robot car's features, purpose, and educational value.
Step-by-step instructions for assembling the robot car kit.
Guide on writing, compiling, and uploading code to the Micro:bit board.
Detailed steps for using the MakeCode online editor for programming.
Instructions for quickly downloading code to the Micro:bit board.
How to add and use MakeCode extension libraries for the robot kit.
Links and information for accessing project resources and test code.
Guide on how to input and load provided test code files.
Steps to install CoolTerm for monitoring serial port data from Micro:bit.
Learn to display a heartbeat pattern on the Micro:bit LED matrix.
Guide on controlling individual LEDs on the Micro:bit matrix.
Creating various patterns and animations on the Micro:bit LED matrix.
Using programmable buttons to control program outputs and display characters.
General| Motor | DC Motor |
|---|---|
| Motor Voltage | 3-6V |
| Reduction Ratio | 48:1 |
| Wheel Diameter | 65mm |
| Chassis Material | Acrylic |
| Weight | 500g |
| Compatible Microcontroller | Arduino |
| Type | 4WD Robot Car Kit |
| RPM (at 6V) | 200 RPM |
| Power Supply | 4 x AA batteries |
