7.Get Started with Micro:bit
The following instructions are applied for Windows system but can also
serve as a reference if you are using a different system.
7.1 Write code and program：
This chapter describes how to write program and load the program to the
Micro: Bit main board V2.
You are recommended to browse the official website of Micro:bit for more
details, and the link is attached below:
https://microbit.org/guide/quick/
Step 1: connect the Micro: Bit main board with your computer
Firstly, link the Micro: Bit main board with your computer via the USB cable.
Macs, PCs, Chromebooks and Linux（including Raspberry Pi）systems are all
compatible with the Micro: Bit main board.
Note that if you are about to pair the board with your phone or tablet,
please refer to this link:
https:/microbit.org/get-started/user-guide/mobile/
To Next Page
Loading...
