Project 13：Colorful Lights
(1)Project Description
This module consists of a commonly used LED with 7colors but in white
appearance. It can automatically flash different colors to create fantastic
light effects when high level is input like a normal LED.
(2)Experimental Preparation：
Insert micro:bit board into slot of keyestudio 4WD Mecanum Robot Car
Place batteries into battery holder
Dial power switch to ON end
Connect micro:bit to computer by USB cable
Open online Makecode editor
Import Hex profile (How to import?) , or click“New Project”and drag
blocks step by step(add MecanumRobot extension library first)
(How to add Mecanum_Robot extension?)
To Next Page
Loading...
