Keyestudio 4WD - Page 231

231
www.keyestudio.com
Code 3：
File Type
Path
File Name
Hex file
KS4031(4032) folder/Makecode
Tutorial/Makecode Code/Project
14：WS2812 RGB LEDs-3.hex
Project 14：WS2812
RGB LEDs-3.hex
Or you could edit code step by step in the editing area.
a. Enter“Neopixel” →“set strip to Neopixel at pin P0 with 24 leds as RGB
(GRB format)”
b. Place it into“on start”block，