program written can be quickly downloaded to the Micro: Bit main board
by selecting ‘Download’.
While it is a little more trickier if you are using a browser to enter
Makecode. However, if you use Google Chrome, suitable for Linux，macOS
and Windows 10, the process can be quicker too.
We use the webUSB function of Chrome to allow the internet page to
access the hardware device connected USB.
You could refer to the following steps to connect and pair devices.
Device pairing:
Connect micro:bit to your computer by USB cable.
Click“...”beside“Download”and tap“Connect device”;
To Next Page
Loading...
