Keysight Technologies DAQ970A Service Guide

1 Service and Repair
28 Keysight DAQ970A/DAQ973A Service Guide
Disassembly
The following tools are recommended for disassembly.
– T20 Torx
®
bit with 14 in-lbs electric torque driver (cover)
– T8 Torx
®
bit with 5 in-lbs electric torque driver (front panel)
– Torque driver 5 in-lbs with 5 mm hex socket (real panel connector)
– Manual torque driver 1 in-lbs (DMM assembly)
WARNING
SHOCK HAZARD.
Only service-trained personnel who are aware of the hazards involved should
remove the instrument covers. Dangerous voltages may be encountered
with the instrument covers removed.
CAUTION
To prevent damage to the fan, do not over tighten the fan screws.

Keysight Technologies DAQ970A Specifications

General

Brand	Keysight Technologies
Model	DAQ970A
Category	Multiplexer
Language	English