Keysight Technologies DAQ970A Service Guide

Calibration Procedures 2
Keysight DAQ970A/DAQ973A Service Guide 41
To change the security code
To change the security code, you must first unsecure the instrument, and then
enter a new code. Make sure you have read the security code rules described on
page 39 before attempting to change the security code.
Front panel operation:
1 To change the security code, first make sure that the instrument is unsecured.
Press [Utility] > Security.
2 Press New Code, enter the new security code, and press Done.
3 Verify the new code, and press Yes to confirm the change.
4 Press LOCK to secure the instrument with the new code.
Remote interface operation:
CALibration:SECure:CODE <new_code>
Changing the code from the front panel also changes the code as seen from the
remote interface.

Keysight Technologies DAQ970A Specifications

General

Brand	Keysight Technologies
Model	DAQ970A
Category	Multiplexer
Language	English