Keysight Technologies DAQ970A Service Guide

Calibration Procedures 2
Keysight DAQ970A/DAQ973A Service Guide 43
5 Reset the security code to the factory default:
a Press [Utility] > Security > New Code.
b Enter “DAQ970A” as the new passcode.
c Press Done.
d Verify the new code, and press Yes to confirm the change.
6 Disconnect the power cord, disassemble the instrument, and remove the
jumper wire applied in step 3.
7 Reassemble the instrument.

Keysight Technologies DAQ970A Specifications

General

Brand	Keysight Technologies
Model	DAQ970A
Category	Multiplexer
Language	English