Products Covered by this Document
Product family name Product name Model number
Data Acquisition Unit Data Acquisition System DAQ970A
Data Acquisition Unit 20-Channel FET Multiplexer Module DAQM900A
Data Acquisition Unit 20-Channel Armature Multiplexer Module DAQM901A
Data Acquisition Unit 16-Channel Reed Multiplexer Module DAQM902A
Data Acquisition Unit 20-Channel Actuator/General-Purpose Switch Module DAQM903A
Data Acquisition Unit 4×8 Two-Wire Matrix Switch Module DAQM904A
Data Acquisition Unit Dual 1:4 RF Multiplexer (50 Ω) Module DAQM905A
Data Acquisition Unit Multifunction Module DAQM907A
Data Acquisition Unit 40-Channel Single-Ended Multiplexer Module DAQM908A
Document Purpose
This document describes instrument security features and the steps to declassify an instrument through memory
clearing, sanitization, or removal.
For more information, go to: http://www.keysight.com/find/security.
Be sure that all information stored by the user in the instrument that needs to be saved is properly backed up
before attempting to clear any of the instrument memory. Keysight Technologies cannot be held responsible
for any lost files or data resulting from the clearing of memory. Be sure to read this document entirely before
proceeding with any file deletion or memory clearing.
Keysight DAQ970A Security Guide 7
To Next Page
Loading...
Need help?
General
