Keysight Technologies E36200 Series User Manual

Service and Maintenance 1
Keysight E36200 Series Service Guide 41
21 Remove three screws from the IO board using a
T10 bit. Remove the IO board from the chassis.
22 Unsolder the binding post assembly from the IO
board. Remove the four screws with a T-10 bit.
Replace the existing binding post assembly with
a new binding post assembly.
23 Perform the steps above in reverse order to reassamble back the instrument.
Step Instructions Visuals

Keysight Technologies E36200 Series Specifications

General

Brand	Keysight Technologies
Model	E36200 Series
Category	Power Supply
Language	English