Keysight Technologies E36232A User Manual

Service and Maintenance 1
Keysight E36200 Series Service Guide 35
9 Remove four screws from the IO board using a
T10 driver. Remove the IO board from the
chassis.
NOTE: Perform step 10 and step 12 only if you have installed the optional GPIB interface (see “Removing/Installing the optional
GPIB interface” on page 20 for more details).
10 Remove one screw from the GPIB module plate
using a T10 driver.
Step Instructions Visuals

Keysight Technologies E36232A Specifications

General

Brand	Keysight Technologies
Model	E36232A
Category	Power Supply
Language	English