Keysight FieldFox Handheld Analyzers Service Guide 37
Tests and Adjustments
Performance Tests (Keysight N7841A Software Package)
Performance Verification Tests
— Error Terms Test — Note that the associated adjustment should be
performed every 12 months.
See “Adjustments (Keysight N7841A Software Package)” on page 38.
— Frequency Accuracy Test
— Displayed Average Noise Level Test
— Frequency Readout and Count Accuracy Test
— IF Frequency Response Test
— Noise Sidebands Test
— Total Abs Amp Accy Low Freq Test
— Total Abs Amp Accy Low Freq Preamp On Test
— Total Abs Amp Accy High Freq Test
— Total Abs Amp Accy High Freq Preamp On Test
— Third Order Intermodulation Distortion Test
— Absolute Amplitude Accuracy Test
—Dynamic Accuracy Test
— System Dynamic Range Test
— Receiver Compression
—Trace Noise Test
—GPS Function Test
—DC Bias Source Test
—Source Power Test
To Next Page
