13 | Keysight | FieldFox Handheld Analyzers - Configuration Guide
FieldFox Spectrum Analyzer FAQs
Question Answer
1. What is included with the basic spectrum
analyzer?
– Basic spectrum analysis, four traces, different detector types, radio standard selection, limit lines
– Channel power, occupied bandwidth, adjacent channel power
– AM/FM tune and listen, field strength measurements, antenna factors, frequency counter
marker
2. What is included with Option 236? – Interference analyzer and spectrogram
– Trace playback and recording
3. What is included with Option 320? – Return loss and VSWR
– Normalization using data/memory
4. What is the difference between Option 320 and
the CAT mode on the combo base model?
Option 320 on the N993xA/N996xA SA offers RL and VSWR. CAT mode on the N991xA/N995xA
combo analyzers offers RL and VSWR, DTF, insertion loss, and also various calibration capabilities
such as QuickCal and OSL.
5. What is included with Option 355? FieldFox analog demodulation has two parts: (1) Tune and listen, and (2) AM/FM metrics. Tune and
listen is available as a standard feature on all N993xA and N996xA FieldFox spectrum analyzers.
AM/FM metrics becomes available when Option 355 is purchased. AM/FM metrics provides the user
with RF spectrum view, demodulated baseband signal waveform, carrier power, frequency deviation,
SINAD and more.
Additional FAQs on pages 8 and 9. FAQs on pages 8 and 9 apply to all microwave FieldFox models.
Documentation
By default, a printed copy of the User’s Guide is not included in FieldFox orders. If you wish to receive the printed User’s Guide,
please order N99xxA Option ABA.
Option Description Notes
N99xxA-0B0 Do not include User’s Guide
N99xxA-ABA Printed User’s Guide in English
The latest FieldFox User’s Guide (manual) is available online from: www.keysight.com/find/fieldfoxsupport
The Service Guide, SCPI Programming Guide, Quick Reference Guide, and Data Link software help file can also be found via the
website above.
To Next Page
Loading...
Need help?
General
