Keysight M937xA PXIe Service Guide 2-11
Tests, Adjustments, and Troubleshooting
Non-Standards Compliant Verification
Non-Standards Compliant Verification
To meet the criteria for non-standards compliant verification, perform the
preliminary checks and the performance tests while stopping to troubleshoot.
Refer to Figure 2-2 for test flow. Troubleshoot and repair the first problem
encountered without continuing to other tests. After you troubleshoot, repair,
and adjust, repeat the last failed portion and generate a new set of data.
Figure 2-2 Non-Standards Compliant Verification Flowchart
To Next Page
Loading...
