09 | Keysight | PXI Vector Network Analyzer - Configuration Guide
www.keysight.com/find/pxivna
G. Select Services: Calibration, Start-up Assistance
– M937xA -UK6 Commercial calibration certification with
test data
Complete set of measurements which tests unit to manufac-
turer’s published specifications. Includes calibration label,
calibration certificate, and data report. Conforms to ISO 9001
– M937x A -1A7 RISO 17025 compliant calibration Complete set of measurements which tests unit to manufac-
turer’s published specifications. Includes calibration label, ISO
17025 calibration certificate, and data report, measurement
uncertainties and guardbands on all customer specifications.
Conforms to ISO 17025 and ISO 9001
– M937xA -A6J ANSI Z540 compliant calibration Complete set of measurements which tests unit to manufac-
turer’s published specifications. Includes pre- and post-ad-
justment data with measurement uncertainty information
compliant to the ANSI/NCSL Z540 standard.
– M937xA -897 Perpetual license for built-in performance
test software for Keysight inclusive cal
Adds built-in performance testing and calibration software
for self-maintainers. Requires additional equipment. See the
analyzer’s Service Guide for more information on equipment
required.
– M937xA -898 Perpetual license for built-in performance
test software for Standards compliant cal
Adds built-in performance testing and calibration software
for self-maintainers. Requires additional equipment. See the
analyzer’s Service Guide for more information on equipment
required
– R-50C-011-3 Calibration Assurance Plan - Return to Keysight, 3 years
– R-50C-011-5 Calibration Assurance Plan - Return to Keysight, 5 years
– R-50C-011-7 Calibration Assurance Plan - Return to Keysight, 7 years
– R-50C-011-10 Calibration Assurance Plan - Return to Keysight, 10 years
1. Additional hardware required. Please refer to the analyzer’s Service Guide for required service test equipment.
Documentation
The PXI VNA is equipped with a Soft Front Panel help system
in English only. This context-sensitive help is available in the
software and on the CD. All PXI VNA documentation is available
at: http://na.support.keysight.com/pxivna/help
Calibration services
The modular products are factory calibrated and shipped with
an ISO-9002, NIST-traceable calibration certificate. A one
year calibration cycle is recommended. The M937xA PXIe VNA
is supported by the Keysight N7800A Calibration Software to
perform calibrations that test all product specifications and
is compliant with ISO 17025:2005, ANSI/NCSL Z540.3-2006
and Measurement Uncertainty per ISO Guide to Expression of
Measurement Uncertainty 1995.
N7800A calibration and adjustment software
The M937xA PXIe VNA is supported by Keysight’s calibration
and adjustment software. This is the same software used at
Keysight’s service centers to automate calibration. The
software offers compliance tests for ISO 17025:2005, ANSI/NCSL
Z540.3-2006, and measurement uncertainty per ISO Guide to
Expression of Measurement Uncertainty.
Product Information: www.keysight.com/find/contactus
Or call: 1 800 829-4444 US
Repair and Calibration: www.keysight.com/find/infoline
Parts and Accessories: www.parts.keysight.com
Email Updates: www.keysight.com/find/emailupdate
For all modular products: www.keysight.com/find/modular