Keysight Technologies M9537A

Keysight M9537A AXIe Embedded Controller Startup Guide 3
Introduction
LAN RST Switch
The LAN RST switch is reserved for Keysight use only. Depressing the LAN RST
switch has no effect.
IMPORTANT: Keysight M9502A or M9505A AXIe chassis must have
firmware revision 1.3.42 or later for the M9537A to identify and
communicate with other chassis module. Refer to the Keysight
chassis web pages for information on updating the chassis
firmware at www.keysight.com/find/M9502A or
www.keysight.com/find/M9505A.
The drivers and Keysight’s IO Libraries Suite installed on the
M9537A controller are the current versions available when the
module shipped from the factory. You should regularly check
Keysight’s web sites and download the latest drivers and
software:
- www.keysight.com/find/M9537A for the embedded controller
- www.keysight.com/find/iosuite for IO Libraries
Periodically check for the latest AXIe chassis firmware:
- www.keysight.com/find/M9502A for the 2-slot AXIe chassis
- www.keysight.com/find/M9505A for the 5-slot AXIe chassis
- www.keysight.com/find/M9514A for the 14-slot AXIe Chasiss