Keysight M9537A AXIe Embedded Controller Startup Guide 21
Step 6: Verify Operation
Step 6: Verify Operation
Your M9537A AXIe Embedded Controller will work out of the box, just by
installing it in an AXIe Chassis and booting it up with a monitor, keyboard, mouse,
and with a LAN cable plugged in. Plug the LAN connection into the ESM RJ45
port. If you want to verify that it is operating correctly follow these simple steps:
1 Boot up the M9537A and verify basic Windows operation by using the
monitor, keyboard, and mouse.
2 Verify that you have network access by opening the browser to a web page
or by opening a command prompt and ping another host.
3
Start Connection Expert, click the Chassis Tab, and verify that your AXIe
Chassis is listed.
4 From Connection Expert, click Start Chassis Web Interface.
5 Click Start Chassis Soft Front Panel.
From the Web Interface, the indicator on the M9537A Front Panel
can be made to blink indicating communication with the chassis.
To Next Page
Loading...
