PXIe Chassis and Modules
PXIe Chassis
Keysight Y1299A-003 MAC Reference Solution Startup Guide 19
PXIe Chassis and Modules
PXIe Chassis
The following two documents provide information on setting up the
M9018A Startup Guide
http://literature.cdn.keysight.com/litweb/pdf/M9018-90001.pdf
M9018A User's Guide
http://literature.cdn.keysight.com/litweb/pdf/M9018-90005.pdf
The M9018A Startup Guide is divided into the following sections:
STEP 1: Verify the Shipment Contents—This section describes how a chassis
system is shipped and what is included with the chassis itself.
STEP 2: Prepare the Hardware and Install the Software—This section describes
the computer hardware and software requirements, installation of an embed-
ded controller, connection of a remote controller, and software installation on
the controller.
STEP 3: Turn On and Verify Operation of the Chassis System—This section
describes how to use Connection Expert and the chassis soft front panel (SFP)
to verify operation of the chassis.
STEP 4: Overview of Installing and Verifying Keysight Modules—This section
provides an overview of installing and verifying Keysight modules in the chassis,
and is intended to supplement your module documentation.
Appendix A: Chassis and Accessory Model Numbers—This appendix lists the
model numbers of the chassis and its accessories.
Appendix B: Chassis Specifications—This appendix provides several of the
chassis technical specifications
The M9018A User's Guide provides more information than the Startup Guide,
including the following:
To Next Page
Loading...
