Keysight Technologies N5193A Firmware Upgrade Guide

4 Firmware Upgrade Guide N5191-90023
Firmware Upgrade Guide
Introduction
The instructions in this firmware upgrade guide enable you to upgrade firmware on a Keysight
X-Series signal generator from the Keysight Technologies website.
Before using this guide, you should be familiar with the basic operation of the signal generator. If
you are not comfortable with using the signal generator’s menus and with entering parameter
values, refer to the instrument’s User’s Guide and familiarize yourself with the basic operation
information.
Basic Upgrade Process
1. Confirm required equipment (page 5).
2. Run the signal generator’s functionality check (page 6).
3. Connect the signal generator to a PC (page 7).
4. Download and install the firmware (page 8).
5. Rerun signal generator’s functionality check (page 6).

Keysight Technologies N5193A Specifications

General

Brand	Keysight Technologies
Model	N5193A
Category	Portable Generator
Language	English