8 Firmware Upgrade Guide N5191-90023
Firmware Upgrade Guide
Step 4. Download and Install the Firmware Files
From the Keysight Technologies website
1. In an Internet browser, enter http://www.keysight.com/find/upgradeassistant.
2. Download and run the latest Keysight X-Series Firmware Package.
3. Once the upgrade assistant starts, follow the program’s prompts (see page 9).
4. After the upgrade completes, press the signal generator’s Local hardkey to return front panel
control.
5. Run the signal generator’s functionality check (see page 6).
If the upgrade is interrupted, the instrument tries to load a recovery image;
if errors appear, they can be safely ignored. Run the Upgrade Assistant
again to install the proper firmware; additional errors may appear, but
these can also be ignored unless pressing Error > Clear Error Queue does
not clear them. If you cannot clear the errors, contact Keysight
Technologies (see page 11).
To Next Page
Loading...
Need help?
General
