03 | Keysight | N9000B CXA X-Series Signal Analyzer, Multi-touch - Configuration Guide
Step 6. Add a tracking generator
Description Option number Additional information
Tracking generator, 9 kHz to 3.0 GHz N9000B-T03 Compatible with N9000B-503, N9000B-507 only
Tracking generator, 9 kHz to 6.0 GHz N9000B-T06 Compatible with N9000B-507 only
Step 7. Add a 75 Ω input connector
Description Option number Additional information
Connector, 75 Ω additional RF input,
1.5 GHz
N9000B-C75 Not compatible with Options T03 or T06; compatible with N9000B-503 and
N9000B-507 only
Step 8. Choose performance
Description Option number Additional information
Enhanced phase noise Standard Installed as N9000B-EP4
Step 9. Add optional features
Description Option number Additional information
Enhanced display package N9000B-EDP Includes spectrogram, trace zoom, and zone span
Basic precompliance EMI N9000B-EMC Perform EMI precompliance measurements with CISPR 16-1-1 detectors and
bandwidths; tune and listen, and measure at marker are also available
External source control N9000B-ESC External source control for Keysight EXG, MXG, and PSG signal generaters; includes
3 BNC cables and 1 cross-over LAN cable; compatible with N9000B-503 and
N9000B-507 only
Step 10. Choose operating system
Description Option number Additional information
Windows Embedded Standard 7 Standard Installed as N9000B-W7X
Step 11. Add security features
Description Option number Additional information
Additional, removable
solid-state drive
N9000B-SSD Provides a fully-imaged, removable solid-state drive in addition to the one installed in the
instrument
Exclude launch program N9000B-SF1 Prevents the launching of Windows programs from the instrument application
Prohibit saving results N9000B-SF2 Prevents the saving/recall of measurement results or user congurations to/from
instrument’s data storage
Step 12. Add rear panel output utilities
Description Option number Additional information
Second IF output N9000B-CR3 Wideband IF out; output on Aux IF connector at rear panel; compatible with N9000B-503
and N9000B-507 only
Congure Your Keysight CXA Signal Analyzer (Continued)
To Next Page
Loading...
Need help?
General
