Keysight Technologies N9000B Configuration Guide

04 | Keysight | N9000B CXA X-Series Signal Analyzer, Multi-touch - Configuration Guide
Step 13. Choose measurement application or software and license type
Note: The last two letters of the ordering numbers indicate the license type—FP stands for xed perpetual, TP for transportable perpetual; it is
recommended that you congure each application with the same license type; visit www.keysight.com/nd/X-series_transportable for more information
about transportable licenses.
Description Fixed license Transportable
license
Additional information
Cellular communications
LTE/LTE-Advanced
FDD
N9080C-1FP N9080C-1TP Standard-based, one-button LTE-FDD measurements
N9080C-2FP N9080C-2TP Standard-based, one-button LTE-Advanced FDD measurements; requires
N9080C-1FP/1TP
LTE/LTE-Advanced
TDD
N9082C-1FP N9082C-1TP Standard-based, one-button LTE-TDD measurements
N9082C-2FP N9082C-2TP Standard-based, one-button LTE-Advanced TDD measurements; requires
N9082C-1FP/1TP
W-CDMA/HSPA+ N9073C-1FP N9073C-1TP Standard-based, one-button W-CDMA measurements
N9073C-2FP N9073C-2TP Adds HSPA measurements; requires 1FP/1TP
N9073C-3FP N9073C-3TP Adds HSPA+ measurements; requires 1FP/1TP, 2FP/2TP
General purpose
Spectrum analyzer Standard Not available Traditional spectrum analysis plus many new and enhanced functions; power
measurements based on industry specications
Analog demodulation N9063C-1FP N9063C-1TP Installed as N9063C-2FP or -2TP and N9063C-3FP or -3TP. Adds one-button
measurement for AM/FM/PM demodulation with metrics, tune and listen, and AF
spectrum; supports audio output (output voltage proportional to frequency deviation).
FM Stereo and RDS are included.
Phase noise W9068C-2FP W9068C-2TP One-button phase noise measurements in frequency domain (log plot) and time domain
(spot frequency)
Noise gure N9069C-3FP
(requires
preamplier)
N9069C-3TP
(requires
preamplier)
Installed as N9069C-1FP or -1TP and N9069C-2FP or -2TP. Adds one-button
measurements for noise gure, gain, and related metrics; requires preamplier to
meet specications; works with Keysight N400xA Series smart noise sources and 346
Series noise sources; supports U7227 Series USB external preampliers; includes the
advanced NF measurement features including external LO control over GPIB/LAN/USB,
multi-stage converter tests with system LO, and manual mode to simulate the legacy NF
meter.
MATLAB software N6171A-M01 Not available Basic signal analysis package; adds MATLAB software environment and the Instrument
Control Toolbox (not upgradeable)
N6171A-M02 Not available Standard signal analysis package; includes basic package and adds Communications
Toolbox and Signal Processing Toolbox (not upgradeable)
N6171A-M03 Not available Advanced signal analysis package; includes standard package and adds Filter Design
Toolbox, RF Toolbox, and System Test (not upgradeable)
Pulse N9067C-1FP Not available Characterize pulsed RF signals in the time domain, with phase, frequency and statistical
analysis of large pulse sets.
89600 VSA software Not available 89601B
(transportable
license is
standard)
Industry-leading measurement software for evaluating and troubleshooting signals in
R&D; PC-based software supporting more than 40 measurement platforms, plus more
than 75 signal standards and modulation types including MIMO analysis;
www.keysight.com/nd/89600vsa
Congure Your Keysight CXA Signal Analyzer (Continued)

Keysight Technologies N9000B Specifications

General

Brand	Keysight Technologies
Model	N9000B
Category	Measuring Instruments
Language	English