Installation Note N9000-90039 3
Option T03 and T06, Tracking Generator Upgrade Kit
Option T03 and T06, Tracking Generator Upgrade Kit
Software and test equipment is required for making adjustments and for performance verification
testing.
Information on how to obtain this software can be found at:
www.keysight.com/find/calibrationsoftware
While Keysight does recommend that a full calibration be performed after the installation of this
upgrade, the end user must ultimately determine whether they want this service or not. If a full
calibration is required, arrangements regarding the level of calibration must be made between the
end user and the calibration provider.
Introduction
This kit includes parts to upgrade any N9000B CXA signal analyzer to add Option T03 and T06
tracking generator.
1. Pre-upgrade Status Check
2. Hardware Installation
3. Upgrade instrument software
4. License files installation
5. Function activation
6. Installation verification
Products Affected: N9000B CXA Signal Analyzer
Serial Numbers: Any with Option T03 and T06
To Be Performed By: (X) Keysight Service Center
(X) Personnel Qualified by Keysight
( ) Customer
Estimated Installation Time:
Estimated Adjustment Time:
Estimated Verification Time:
2 Hours
1 Hours
1 Hours
To Next Page
Loading...
Need help?
General
