6 Installation Note N9000-90039
Option T03 and T06, Tracking Generator Upgrade Kit
Installation Procedure
Analyzer Information
1. Connect a power cord to the analyzer and turn on the analyzer.
2. After the analyzer has completed turning on, press System, Show, System. Make note of the
following information from the Show System screen:
Product Number: _____________
Serial Number: ______________
Instrument S/W Revision: ______________
3. Refer to the data in step 2 above. If the Product Number is not N9000B, do not proceed with
the installation of this kit. This kit is to be installed only on N9000B signal analyzers.
To Next Page
Loading...
