Product Declassification and Security Product Name: Truevolt Series of Digital Multimeters
Model Numbers: 34460A, 34461A, 34465A, 34470A
Page 11 of 17
Memory Clearing, Sanitization and/or Removal Procedures
This section explains how to clear, sanitize, and remove memory from your instrument
for all memory that may contain application-specific information and that can be written
to during normal operation. This section also highlights the clearing and sanitization
procedures if more than trivial, such as cycling power on your instrument.
Performing an instrument sanitization requires the instrument Security option (SEC) to
be installed. Please refer to the Truevolt Series Operating and Service Guide for more
information on available options.
With the instrument Security option, a single button press will completely sanitize all
internal user accessible memories using the appropriate NISPOM sanitization procedure.
Without this option, user files must be individually deleted or overwritten to manually
clear memory.
To Next Page
Loading...
Need help?
General
