Safety
9
Figure 1 Typical Probe Consumption
Do not subject the unit to vibrations or shocks during transport or
handling. Be especially careful to avoid dropping the unit.
Do not store the unit where it will be exposed to direct sunlight,
high temperature, high humidity, or condensation. If exposed to
such conditions, the unit may be damaged, the insulation may
deteriorate, and the unit may no longer satisfy its specifications.
Before using the unit, inspect it and check the operation to make
sure that the unit was not damaged due to poor storage or
transport conditions. If damage is found, contact your dealer or
Keysight representative.
This unit is not constructed to be waterproof or dustproof, so do
not use it in a very dusty environment or in one where it will get
wet.
To Next Page
Loading...
Need help?
General
