Keysight 34921A-34925A User’s Guide 5
GROUND THE INSTRUMENT
This is a Safety Protection Class I Product (provided with a protective
earthing ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth contact. Any
interruption of the protective conductor inside or outside of the product is
likely to make the product dangerous. Intentional interruption is prohibited.
The mains wiring and connectors shall be compatible with the connector
used in the premise electrical system. Inadequate earth grounding can
damage the instrument. Always use the three-prong AC power cord supplied
with the instrument.
Connect the AC power cord as follow:
– Ensure that the power cord is not damaged.
– Install the signal generator so that one of the following items is readily
identifiable and easily reached by the operator: AC power cord,
alternative switch or circuit breaker.
– Insert the mains plug into a socket outlet provided with a protective
earth grounding.
IN CASE OF DAMAGE
Do not use the instrument if it is damaged. Before you use the instrument
inspect all connections. Pay particular attention to the insulation
surrounding connectors and / or cable assembly insulation. NEVER use a
cable showing any signs of damage. Faulty cables can cause electrical
shock and /or fire hazards and could lead to personal injury or death.
Safety of any system incorporating the equipment is the responsibility of the
assembler of the system.
To Next Page
Loading...
