To Next PageTo Next Page
Need help?Do you have a question about the Keysight 34922A and is the answer not in the manual?
General| Model | 34922A |
|---|---|
| Type | Control Unit |
| Digital Input Logic Low | 0.8 V max |
| Digital Output Voltage | 5 V |
| Maximum Voltage | 300 VDC |
| Maximum Current | 1 A |
| Temperature Range | 0 °C to 55 °C |
| Digital Input Logic High | 2.0 V to 5.0 V |
| Operating Temperature | 0 °C to 55 °C |
| Interface | USB, LAN, GPIB |
| Power Requirements | 100-240 VAC |
| Storage Temperature | -40 to 70 °C |
Explanation of hazard symbols (CAUTION, WARNING) and safety procedures.
Defines symbols used on the instrument and in documentation for safe operation.
General safety rules to be observed during all phases of instrument operation.
Warning regarding the instrument's auto-ranging line voltage input.
Safety instructions for grounding the instrument and operating if damaged.
Warnings related to power cord function, hazardous voltage levels, and input ratings.
Safety warnings regarding cover removal, residual voltages, and high energy sources.
Warnings on Analog Buses, relay operations, serviceability, and cleaning procedures.
Explains the hardware safety interlock for Analog Bus connections.
Cautions and warnings related to terminal block wiring procedures.
Explains the safety interlock protection mechanism for the module.
Safety warnings for wiring the 34923T-001 and external connections.
Safety warnings for wiring the 34923T-002 and external connections.
Safety warning regarding interlock pins for Analog Bus relay activation.
Cautions and warnings related to terminal block wiring procedures.
Safety requirements for external wiring connected to hazardous voltages.
Describes high voltage detection, current limiting, and overvoltage state actions.
Safety warnings for wiring the 34925T-001 and external connections.
Safety warnings for wiring the 34925T-002 and external connections.
