1 Operation and Service Guide
26 Keysight E4412A and E4413A Operating and Service Guide
Device-Under-Test (DUT) Measurement
Figure 1-4 DUT measurement setup
1 Leave the adapter-under-test in place - refer to step 8.
2 Record the S-Parameter readings (LOG_MAG) for the PNA as dutS11,
dutS12, dutS22, and dutS21 respectively and compare them against the
typical specifications.
Operating instructions
The E4412A and E4413A power sensors are compatible ONLY with the newer
E44XX-Series power meters. They are NOT compatible with the earlier
430-Series, E1416A, or 70100A power meters. To operate the power sensor, refer
to the operating instructions in the Keysight E44XX-Series Power Meter User’s
Guide.
To Next Page
Loading...
