Keysight E8267D User Manual

NOTE: For the latest revision of this installation note, go to the
website for your instrument:
http://www.keysight.com/find/psg or http://keysight.com/find/e8663b
Keysight E8257D/67D
PSG Signal Generators and
E8663B Analog Signal Generator
Add Option UNW (Narrow Pulse Modulation 10 MHz-3.2 GHz)
Kit Part Numbers: E8257DK-UNW, E8267DK-UNW, and
E8663BK-UNW
Installation Note

Keysight E8267D Specifications

General

Brand	Keysight
Model	E8267D
Category	Inverter
Language	English

Summary

Notices

Introduction to Option UNW Installation

Installation Kit Parts List

Tools Required for Installation

Lists necessary tools for the installation process, including various drivers and pliers.

Safety Considerations

Check Signal Generator Functionality

Remove Outer and Inner Signal Generator Covers

Remove the Outer Cover

Detailed steps to remove the outer casing using specific tools and procedures.

Remove the Inner Top Cover

Install A12 Pulse Modulator Assembly (with Option 1EH)

Install A12 Pulse Modulator Assembly (without Option 1EH)

Activate Option UNW

Verify Proper Installation of Option UNW

Re-Assemble the Signal Generator

Verify Signal Generator Calibration