Need help?Do you have a question about the Keysight N3300A and is the answer not in the manual?
Certifies product met specifications at shipment.
Hardware warranted for defects for one year.
Exclusions from warranty coverage.
States sole customer remedies.
Information on support programs.
General safety precautions for the instrument.
Specifies operating environment limits.
Pre-power-on safety checks.
Importance of earth ground connection.
Warnings against hazardous operations.
Explains safety symbols used in the manual.
Overview of the instrument's front panel.
Overview of the instrument's rear panel.
Settings for interface and address.
How to enter numeric values via front panel.
Explanation of front panel status indicators.
Keys for direct function execution.
Summary of front panel menu structure.
Overview of SCPI commands.
Guide on how to use the manual.
Specific safety points related to the load.
Lists available optional equipment.
Overview of the DC Electronic Load mainframe.
Lists key functionalities of the instrument.
Description of front panel interface elements.
How to control the instrument remotely.
Explains CC, CV, and CR operational modes.
Details on CC mode operation.
Details on CR mode operation.
Details on CV mode operation.
How to perform transient testing.
Generating complex input sequences.
Synchronizing operations with events.
Control of output change speed.
Functions for input on/off and shorting.
Instrument safety mechanisms.
Storing and retrieving instrument configurations.
Interfaces for external control.
How to measure input parameters.
Procedure for checking for shipping damage.
Lists included accessories.
Instructions for cleaning the unit.
Step-by-step guide for module installation.
How channels are assigned.
Physical installation requirements.
Guidelines for using the instrument on a bench.
Instructions for mounting in a rack.
Connecting power and signal cables.
How to use manual connectors.
Details on using 8mm terminals.
Guidelines for selecting input wires.
Pinout and usage of the control connector.
Configuration for local/remote sensing.
Connecting trigger and digital signals.
Setting up GPIB and RS-232 interfaces.
Typical connection setups.
Specifics for operating below 3 volts.
Purpose of the checkout procedure.
Step-by-step guide for initial testing.
Troubleshooting common issues.
Overview of the chapter content.
Detailed view of the front panel.
Function of system control keys.
Keys for accessing operational menus.
Keys that perform direct actions.
Keys for navigating menus and lists.
Keys for accessing measurement functions.
Keys for managing input functions.
Keys for transient operation setup.
Keys for managing trigger functions.
Keys for list programming.
Keys for inputting values and parameters.
Practical guides for using the front panel.
Purpose of the appendix.
List of necessary test equipment.
General overview of performance tests.
Verifies IMON zero calibration.
Tests CC mode operation and accuracy.
Verifies current regulation.
Tests CV mode operation and accuracy.
Verifies voltage regulation.
Tests CR mode operation and accuracy.
Lists parameters that can be calibrated.
Program for calibrating IMON, IPROG, and Current.
Program for calibrating Voltage.
Program for calibrating Resistance.
To Next Page
General
