37
3
Installation
Inspection
Damage
When you receive your electronic load, inspect it for any obvious damage that may have occurred during
shipment. If there is damage, notify the shipping carrier and nearest Keysight Sales and Support Office
immediately. The list of Keysight Sales and Support Offices is at the back of this guide. Warranty information
is printed in the front of this guide.
Packaging Material
Until you have checked out the electronic load, save the shipping carton and packing materials in case the unit
has to be returned. If you return the electronic load for service, attach a tag identifying the model number and
the owner. Also include a brief description of the problem.
Items Supplied
The following user replaceable items are included with your electronic load. Some of these items are installed
in the unit.
Table 3-1. Items Supplied
Power Cord Contact nearest Keysight
A power cord appropriate for your location.
Trigger/Digital Connector 0360-2693 A 6-pin connector is provided for input and
output trigger and digital signals.
Control Connector 0360-2870 A 14-pin control connector is provided for
connecting remote sense leads.
User's Guide 5964-8196 Contains installation, checkout, and front panel
Programming Guide 5964-8198 Contains detailed GPIB programming
Cleaning
Use a dry cloth or one slightly dampened with water to clean the external case parts. Do not attempt to clean
internally.
WARNING: To prevent electric shock, unplug unit before cleaning.
To Next Page
Loading...
