Keysight M8195A User Manual

Keysight M8195A Manual
Get Pricing & Availability at
ApexWaves.com
Call Today: 1-800-915-6216
Email: sales@apexwaves.com
https://www.apexwaves.com/signal-generators/keysight-technologies/high-performance-arbitrary-waveform-generators/M8195A

Keysight M8195A Specifications

General

Brand	Keysight
Model	M8195A
Category	Inverter
Language	English

Summary

Introduction

Installing Licenses

Provides instructions for installing software licenses.

The Front Panel of the M8195A Rev 2

Describes the components and functions of the instrument's front panel.

Theory of Operation

Explains the internal workings and architecture of the M8195A.

M8195A User Interface

Launching the M8195A Soft Front Panel

Outlines the procedures to start the M8195A Soft Front Panel application.

Clock Tab

Used to configure the sample clock and reference clock of the M8195A module.

Output Tab

Configures the Data Outputs (Channel 1-4) of the M8195A AWG module.

Trigger Tab

Configures trigger and event input parameters for sending software triggers.

Standard Waveform Tab

Import Waveform Tab

Sequence/Control Tab

Sequencing

Sequencing Hierarchy

Trigger Modes

Advancement Modes

Sequencer Modes

Dynamic Sequencing

Streaming

Streaming Implementation Using Dynamic Modes

Memory Ping-Pong

General Programming

SCPI Programming

System Related Commands (SYSTem Subsystem)

Common Command List

Status Model

:ARM/TRIGger Subsystem

Details commands for arming and triggering sequence/scenario execution.

:OUTPut Subsystem

Controls output paths, reference clocks, and filter settings for channels.

:TRACe Subsystem

Controls arbitrary waveforms, segment creation, and data transfer.