Keysight M8195A - Introduction; Remote Programming Examples; Example Files for Import

Keysight M8195A Revision 2 – Arbitrary Waveform Generator
User’s Guide
7 Examples
7.1 Introduction / 261
7.2 Remote Programming Examples / 261
7.3 Example Files for Import / 261
7.4 Example Correction Files / 262
7.5 Example Custom Modulation Files / 262
7.6 Example Signal Studio File / 262
7.1 Introduction
In a standard installation the examples can be found in the folder “C:\Program Files
(x86)\Keysight\M8195\Examples”.
7.2 Remote Programming Examples
The MATLAB IQtools are described in file “README.docx” in subfolder
“MATLAB\iqtools”. The C++, C# and VB programs are provided as Visual Studio 2008
solutions. However, they can be easily converted to more recent Visual Studio
versions. They show how to connect to the AWG, write a sine wave into the memory
and start signal generation. They use the VISA or VISA-COM libraries.
7.3 Example Files for Import
The subfolder “WaveformDataFiles” contains examples for all supported import file
formats. To import them use either the SFP Import Waveform panel or the SCPI
command TRAC[1|2|3|4]:IMP.