Keysight M8195A - General Programming

Keysight M8195A Revision 2 – Arbitrary Waveform Generator
User’s Guide
6 General Programming
6.1 Introduction / 154
6.2 IVI-COM Programming / 155
6.3 SCPI Programming / 155
6.4 Programming Recommendations / 158
6.5 System Related Commands (SYSTem Subsystem) / 159
6.6 Common Command List / 166
6.7 Status Model / 169
6.8 :ARM/TRIGger Subsystem / 180
6.9 :TRIGger - Trigger Input / 191
6.10 :FORMat Subsystem / 194
6.11 :INSTrument Subsystem / 195
6.12 :MMEMory Subsystem / 200
6.13 :OUTPut Subsystem / 207
6.14 Sampling Frequency Commands / 216
6.15 Reference Oscillator Commands / 217
6.16 :VOLTage Subsystem / 221
6.17 [:SOURce]:FUNCtion:MODE ARBitrary|STSequence|STSCenario / 224
6.18 :STABle Subsystem / 225
6.19 Frequency and Phase Response Data Access / 236
6.20 CARRier Subsystem / 237
6.21 :TRACe Subsystem / 239
6.22 :TEST Subsystem / 260